As a layman, we all are aware of the actual use of enamel thinner which is to remove and completely clean the oil paints from brushes, equipment, surfaces or literally anywhere. As much as we feel that this is pretty much the job of an enamel thinner, there is still a lot that one should be knowing specially if you are working as a painter or in an industry of sort. Let’s find out all the tips and tricks that are required to be followed when using an enamel thinner.
Tips for Using Enamel Thinner
Not using Raw Paint
Never ever use a raw paint directly for the first coverage as this may impact the results that you are looking for.
When you are planning on using a thinner, make sure that the temperature the paint is kept at is under room temperature.
It is a mandatory requirement to keep a stirring object with you when pouring in a thinner in the paint as continuous stirring will help in getting rid of the particles behind. This is a very important step mainly because if any residue is left behind, this may reflect in the result of discount paint Sydney.
The right quantity of an enamel thinner can be identified by the fact that the liquid is neither too thick nor too runny. In fact, it is highly advisable to always conduct a patch test of double coating to see whether you are getting the right results or not. Make sure you are not directly starting to paint without any check and balance.
Speed of Stirring
As much as we emphasized on the stirring while adding the thinner to the best epoxy primer, make sure you are not stirring to quickly as this will impact the quality of paint. The mixture should be mixed carefully at a nominal speed in order to avoid any negative results.
Removal of Particles
When you add a thinner to the paint, there are high chances of particles to be seen in the paint. Ensure that all such thick chunks of particles are removed from the paint before you actually begin the job otherwise all these chunks would reflect on the wall which I am sure nobody wants.
In rare cases, water is also a requirement to be added in the mixture of paint and thinner when the mixture is still considered to be too thick for the paint job to be done.
Closing the Lid
Once you have added the thinner to the paint, never ever keep the paint open like that as such mixtures have tendency to evaporate. Always keep the lid closed for the mixture to remain intact.